Select your country Close

Accessories

For truck-mounted cranes

A wide range of additional equipment is available to ensure the best performance and maximum functionality of our truck-mounted cranes, in any operation required. Versatile and easy to use, these highly safe and precise accessories can be added at any time.

  • Accessories type
    Max. load capacity (kg)
    Datasheet
  • Brick Stack Grapple
    2300

    PARALLEL SQUEEZE

    The technically unique H 332 brick stack grapple is a versatile tool for palletized and non-palletized materials.

    • Rigid or adjustable plunge depth of parallel opening and closing clamping arms
    • Versatile tool with opening range of 400 mm to 1400 mm
    • Handling of heavy loads with reinforced version H 333
    • Adjustable plunge depth of H 332V and H 333V can match the size of the stack-easy adaption with a mechanical latch
    • Precise synchronisation of the arms
    • Safety through internal pressure relief valve and non-return valve
    • Long life due to generously dimensioned bearings, integrated grease reservoir, automatic wear compensation of main bearing, spherical central bearing for the cylinders
    • Easy to use with durable and replaceable rubber inserts

    View Hyva parallel squeeze

    View Hyva scissor grab

    SCISSOR GRAB

    The robust brick stack grapple H 331 handles loads up to 2000 kg

    • Fixed plunge depth with pivot clamping arms
    • Versatile tool with opening range of 40 mm to 1500 mm 
    • Synchronised function of clamping arms due to sturdy gear-toothed quadrants
    • Safety through internal pressure relief valve and non-return valve
    • Reduced overall height in comparison to the plunge depth due to lower rotator position
    • Compression rails with durable and replaceable rubber inserts
  • Hyva pallet fork
    3000

    Hydraulic/mechanical center of gravity adjustment & adjustable tines with spindle

    The efficient pallet fork H 401 T is based on the regular H 401 T, but additionally features the possibility to extend to a height of up to 2500 mm. The same goes for the nonhydraulic version H 401T with spring loaded centre of gravity compensation.

    • Efficient handling of many kinds of loads in an economic, one-man operation
    • Precise positioning of the loads is no problem in combination with the HYVA rotator – continuous rotation, precise start and braking ability.
    • Versatile height adjustable with a lock pin
    • Versatile width of tines
    • Easy to use due to the dimensions of the H 401H

    Manual Shifting & Tines with lock pin adjustment

    The robust pallet fork H 414 with manual centre of gravity compensation is an economic alternative.

    • Manual change of position of shifting collar by the operator
    • Suspension Ring for Hyva flange or shaft rotator, or for a crane hook is included in the package
    • Throat height and tine spread adjustable in steps with a lock pin

    Self shitting & tines with lock pin adjustment

    The robust pallet fork H 415 with spring loaded centre of gravity compensation can easily be adapted to different loads with adjustable plunge depth and adjustable tine spread. 

    • Efficient handling that in an economic, one-man operation
    • Throat height and tine spred adjustable in steps with a lock pin

     

  • Hyva universal fork
    2500

    The universal fork H 461 for loader cranes handles wallboards and other lying building materials up to a size of 1250 height and 460 mm depth

    •  Different tine spreads
    • Safe transport of sheets of wallboard in the hinged lower section
    • Protection of the sheets during unloading
    • Security is assured even in case of a drop in pressure
    • Accurate positioning of the load is ensured by the tilt cylinder and the HVY rotator
  • Clamshell Buckets
    3000

    Hyva Clamshell Bucket with small volume & HPXdrive Standard

    The Hyva Clamshell Bucket H 626HPX with the HPXdrive Standard for digging and handling, is due to its size ideal for small cranes. The revolutionary HPXdrive technology guarantees a reliable and virtually maintenance free attachment

    • Reliability of the HPXdrive
    • Self-lubrification and compact design that contribute to a long-life cycle
    • Versatility with different types of shells
    • Profitability through low maintenance costs
    • Precise handling 
    • Rotator with shaft is available as an alternative

    Hyva Clamshell Bucket with open shells & HPXdrive Standard

    The Hyva Clamshell Bucket H 604U HPX is a clamshell bucket using the HPXdrive Standard for handling and easy digging tasks. The open shells enable the handling of bulky materials. The revolutionary HPXdrive technology guarantees a reliable and virtually maintenance free attachment.

  • Hyva grapples
    2000

    Hyva Rock Grapple with HPXdrive Standard

    The H 613HPX with HPXdrive Standard for positioning and handling natural stones, curbstones, etc. is an ideal tool for landscaping architecture. A non-return valve secures constant pressure even in case of unexpected pressure drop.

    Hyva Timber Grapple with HPXdrive Standard

    The H 632HPX with HPXdrive Standard for loading short logs, shrubbery, branches, etc. A non-return valve secures constant pressure even in case of unexpected pressure drop.

    View Hyva Rock & Timber Grapples

    View Hyva Hay & Forestry Grapple

    Hyva Hay & Forestry Grapple with HPXdrive Standard

    The hay and forestry grapple H 641HPX using the HPXdrive Standard is ideal for handling hay, brushwood, compost or manure - often used for municipal operations and road work.

  • Orange peel grapples
    3000

    120 - 240 LITRES CAPACITY

    Small orange peel grapple for the handling of bulky scrap, the H 650 small for various applications is available with different tine shapes and different volumes (120l, 180l, 240l).

    • Powerful operation with high closing force (11 kN to 13 kN at an operating pressure of 26 MPa)

    250 - 500 LITRES CAPACITY

    Large orange peel grapple for the handling of bulky scrap, the H 650 large for various applications is available with different tine shapes and different volumes (250l, 350l, 500l).

    • Powerful operation with high closing force (13 kN to 18 kN at an operating pressure of 26 MPa)

    COMMON FEATURES

    •  Different tine shapes of the H 650 series to handle a variety of materials:
      • H 651: fully closing tines for handling swarf, loose waste, soil, gravel etc.
      • H 652: half closing tines for handling swarf, scrap, rubbish, waste paper etc.
      • H 653: pointed tines for bulky scrap, car bodies, bundled waste paper etc.

    •  Number of tines can be chosen with 4 or 5 tines
    • Long life due to a solid design
    • A lifting-eye on the centre section acts as an additional stop

    Small and Large Orange Peel Grapples

    Hyva Asymmetric Orange Peel Grapple

    HYVA ASYMMETRIC ORANGE PEEL GRAPPLES WITH 240 LITRES CAPACITY

    The reliable asymmetric orange peel grapple H 652/2 with half closing tines to ensure maximum performance. It is mainly used for handling scrap, waste and construction materials, and is available with 5 (H 652-5/2) or 6 arms (H 652-6/2) – depending on the task

    • Special slot on the main carrier allows the transport of a big orange peel grapple
    • Half closing tines by default, completely closing at the points, for handling waste, scrap, loose materials, etc.
    • Counter-balance valve guarantees a secure retention of loads even when pressure drops
    • Long service life due to robust design
    • Strong operation due to high closing forces (13 kN at 26 MPa operating pressure).
  • Logging grapple
    8000

    The H 634 is a robust and powerful tool for logs – especially for heavy duty operation. Well suited for handling single trunks

    • Low height with one horizontal hydraulic cylinder
    • Long service life is ensured by the sturdy construction, high quality components and generously dimensioned bearing system
    • Synchronisation of arms due to sturdy compensation rods
    • Protection of the hoses for the hydraulic connections
    • Precise positioning of the loads in combination with the rotator; continuous rotation, precise start and stop ability
    • Safety is assured in the event of an unexpected pressure 
    • Efficient handling with high closing forces (13 to 16 kN at an operating pressure of 24 MPa)
  • Bottle-bank discharge units
    2500

    Containers can be emptied even faster and more cost effectively with a one-man operation.

    For containers with ring system

    Hyva container discharge accessories with ring system are characterised by short cycle times and an attractive acquisition price.

    • Low overall height due to compact design
    •  Rugged engineering with rope operation
    • Hooks on automatically when container is lifted
    • Precise positioning with rotator
    • Protection against damage of container by automatic lift stop

    For containers with mushroom system

    Hyva container discharge accessories with the fast mushroom system are characterised by short cycle times and an attractive acquisition price.

    • Robust mechanics with self centring hydraulic interlocking
    • Precise positioning with rotator, direct hose routing
    • Independence of crane operating pressure due to the pressure relief valve
    • Protection against damage of container by automatic lift stop and an additional height control system
  • Manipulators
    3000

    BARRIER LIFTER

    The H 932MB barrier lifter is a mechanical grapple for fast and convenient handling of concrete barriers and blocks

    • Safe: Carbide gripping pads ensure a safe operation 
    • Fast, efficient and independent, functions without assistance from a ground man
    • Versatile and cost-effective

     

    Hyva Barrier Lifter

    Hyva Manipulators

    MANIPULATOR / POLE GRAPPLE

    A hydraulically operated attachment used for positioning tubes or poles, the H 930 is for use on loader cranes with three functions.

    • Manoeuvrability through three hydraulic functions gripping, lifting and turning (rotation and tilting) of straight round poles (three hydraulic circuits are necessary). Unlimited angle of rotation
    • Heavy loads of up to 3000 kg can be handled
    • Precision operation assured through continuous rotation

    3 - AXES - MANIPULATOR 

    The pol grapple H 930-1000 Special is a perfectly matched attachment for drilling sites. Poles can be gripped easily and positioned precisely. The 3-Axes-Manipulator H 931 features maximum maneuvrability and ensures flexibility of the loader cranes use in any arc position.

    • 3-axes-manipulator: maneuverability by three hydraulic functions: gripping, rotating and tilting (3rd hydraulic cycle needed)
    • Endless rotation
    • High loads up to 1000 kg
    • Precise positioning guaranteed by self-locking worm drive (H 931-1000)
    • 5-line feedthrough
    • H 930-1000 Special provides an exchangeable jaw system
  • Augers & Drive Units

    Hyva Drive Units for Augers

    For use on truck mounted cranes, H 250 auger drives are an economical, robust solution for drilling holes for fence posts, poles, foundations and landscaping. Application specific wear parts and augers mean our auger packages are tailor-made to suit a wide range of needs.
    Designed and built to last, H 250 series drive units can handle hundreds of consecutive cycles.

    • Drive units: steel housing can withstand high shock loading, robust construction, components run in a maintenance free, constant oil bath, gears can easily be shifted from forward to reverse to quickly free the unit from being jammed
    • Augers: teeth are set on a continuous spiral to provide maximum penetration and uniform performance 
    • Wear parts: rubber locking system makes teeth easy to exchange
    • Two teeth options
  • Rotators
    10.000

    Long lasting rotators

    High efficient and tailored to meet our customers requirements, the gear-type design ensures a very compact and powerful rotator with high precision control and braking ability for easy operation.

    A grapple does not rotate unexpectedly when digging, even under maximum load, and there is no need for stability compensation when handling longer lengths of timber. These are only some of the many working situations where operators appreciate the advantages of using HYVA rotators.

     

  • Hyva Agri Clamp

    Hyva AGRI 503 is a 3 jaw grab with a volume of 50 liter, specially designed for agricultural purposes like picking up fruit.
    Working pressure: 90 bar